Wiring Harness for T Style guitars

Pre-wired Control plate for Tele® and other T Style guitars.
3 way switch with black hat style knob
1 Volume potentiometer (B250K0
1 Tone potentiometer (A250K)
2 Metal screw on chrome knobs.
Jack, import style and Switchcraft #11
2 Mounting screws in chrome

Poly film capacitor at .01uF

Prewired, ready for pickups (not included). Soldering will be required, you will need to have equipment and intermediate skills for finish the wiring for your pickups you supply. (pickups are not included in this set.)

Specifications:
Wired for Generic T Style 2 single coil pickups (standard or hot)
Passive pickup setup

3 way, positive position switch
Capacitor .01uF Poly Film
24mm potentiometers (Volume is B250K, Tone is A 250K)
Import jack pre wired
Includes Switchcraft #11 jack as option
2 mounting screws

Plate description:
Metal, Chrome Plated
Plate size is standard 1.265" x 6.313"
Mounting holes are on 5.902" (5 59/64" or just over 5 7/8")
Plate thickness is 5/64" (2.2mm)
Includes switch mounting screws to match

PLEASE NOTE: You will need to solder and assemble the pickup wiring on this product. The product is assembled and wired as far as possible for the application, you will have to supply and solder (wire) the additional connections for your pickups (not supplied with unit, order separately)
It will require intermediate skills at soldering to hook up your pickups to this item. An additional jack is supplied if you prefer a different setup. You will need to solder this as well.

PLEASE NOTE:
This does not include pickups, you will need to order passive pickups separately for this unit.
This will handle 2 wire passive single coil pickups standard or hot versions.

The trademarks, service marks or registered trademarks are those of their respective owners.

These parts are made by or for Bitterroot Guitars. They do not originate from any OEM manufacturers.