Specifications:Cast Tailpiece
2 3/64" string spread, fully adjustable.
Tailpiece is 18.2 mm depth
12" Tailpiece Radius
1/2" hole (12.5mm) required for mounting posts.
Mounting posts are 5/16 x 24 US Spec threaded posts
We include the mounting bushing in this kit, which is normally an add-on item. The Bushing is 5/16 x 24 thread. 22.3mm depth (7/8") x 12.75mm diameter with 13.2mm outside diameter. Knurled edge. Requires a 1/2" diameter mounting hole.
Cast Tailpiece with curved string mount, 12" radius
82mm (approximately 3 15/64") Post center to center.
Kit comes with:
Tailpiece
Tailpiece posts and mounting bushings (Zinc finish on bushings)
Gold Finish
Notes:
Kluson® vintage stop-bar tailpiece!
Designed for your instrument requiring a stop-bar tailpiece to accompany a separately mounted bridge.
This is a super high-quality tailpiece that is very hard to distinguish from the originals used and best of all ... it’s made in America! the zinc used helps maintain a warm, vintage tone without sacrificing string definition and clarity.
The plating process is a 5 step process which is every bit as comparable to what you would find on blue ribbon winning show cars. this tailpiece is the most common material and is used by some of the greatest usa guitar manufacturers from the golden era of guitar building on many current standard models. zinc is commonly used when the wood types in the instrument have a tendency to reflect a clear, bright tone like maple or when the electronics promote the desired clarity.
Swap out for the new Kluson® tailpiece to see and hear the difference that quality usa made parts will do for your instrument.
If you want the best, get the new Kluson® stop bar tailpiece to accompany your bridge and look for the new Kluson® bridges coming your way! (includes 5/16-24 steel studs)
We also include the mounting bushings as well.
![]()
