Music Nomad Fret Leveler - Leveling (L-Beam) 7 (18cm)
for Acoustic and Electric GuitarLeveling your frets and fingerboard has never been easier with MusicNomad's Fret Leveler L-Beam. 7" (18cm), no detail was overlooked from top to bottom in creating a new higher standard. Our unmatched thicker wall design lets the weight of the leveler do the work for you. Our exclusive ergonomic curved handle design gives you the ultimate comfort and control, plus helps avoid slipping out of your hand. Our radius beveled edges keep you from banging into and damaging high frets. Most importantly, the top and bottom smooth flat edges go through a 3-step precision grinding process with an accuracy tolerance of +/-.00125" per foot. We even include a convenient hang hole and three Adhesive-backed 3M™ Stikit™ Gold Abrasive strips, the preferred choice for top repair shops: (2) P240 Grit, (1) P400 Grit. That's MusicNomad quality - raising the bar in equipment care.
OUR 7" (18cm) FRET LEVELER SETS A NEW HIGHER STANDARD for what you should expect when you buy a Small Fret Leveling Beam for Acoustic and Electric Guitars. This short 7" size, compared to the common 16" length found in other designs, is the perfect length to cover and level all the frets, ensuring precise accuracy with fewer strokes. Great for leveling unfretted fingerboards too!
UNMATCHED THICKER WALL DESIGN GIVES YOU THE WEIGHT YOU WANT: We beefed up our design so the weight of the leveler does the work for you. The 7" L-Beam is in a weight class by itself at 0 .578 lbs (262g).
EXCLUSIVE ERGONOMIC HANDLE + ROUNDED BEVELED EDGES: The 7" L x 1.00" W x 1.75" H features our MusicNomad exclusive ergonomic curved handle design for the ultimate comfort and control, plus helps avoid slipping out of our hand. Our 1.75" lower profile height gets you closer to the fretboard for better control and feel. We even spent the extra time to radius the edges to keep you from banging into and damaging high frets. This a detail you will appreciate.
SMOOTH FLAT EDGES & SANDPAPER INCLUDED: Top and Bottom Edges are precision ground to a flat accuracy tolerance of +/-.00125" per foot via a strategically designed 3-step grinding process on each work surface. We include three Adhesive-backed 3M™ Stikit™ Gold Abrasive strips, the preferred choice for top repair shops: (2) P240 Grit, (1) P400 Grit.
DESIGNED BY OUR SONOMA, CA (USA) TEAM: The premium quality 6063-T5 Aluminum has a blue anodized finish that is extremely durable, abrasion resistant, easy to clean and does not peel or chip. Convenient hang hole included.