Specifications:
This set is for 7 pieces of approximately 1.7mm thick inlay (just over 1/16").
Enough material to allow all fret board radius and sanding of the fret board.
Arrows can be set up (as shown or down)
Pieces are: (approximate sizes and will vary some due to the nature of the product)
#Fret 1 - 29/32" (23mm) wide by 3/4" high (19mm)
#Fret 3 - 1 1/32" wide (26mm) by 43/64" high (17mm)
#Fret 5 - 1 7/64" wide (28mm) by 19/32" high (15mm)
#Fret 7 - 1 9/64" wide (29mm) x 15/32" high (12mm)
#Fret 9 - 1 7/32" wide (31mm) x 11/32" high (9mm)
#Fret 12 -1 19/64" wide (33mm) x 17/64" high (7mm)
#Fret 15 -1 3/8" wide (9.7mm) x 15/64" high (6mm)
PLEASE NOTE: This is a natural product, the photo shown is a representation of the product, color, hue and other details will vary from piece to piece due to natural variations in the shell.
The pieces are tape on the face for assembly and primed on the rear for bonding. The tape will need to be removed prior to sanding.
Because this product is prepared for installation, it is difficult to photo individual sets.
This does require a skill level for inlay and fret work. It is not recommended for direct replacement part unless you have the skills to do the work.
Please contact us with questions regarding this product.