Specifications:
Screw:
Designed for counter sunken holes
Thread is #4, design is thread cutting
Major diameter is 3.1mm (.125")
Minor diameter is 2.77mm (.108")
Length is 19mm (3/4")
Finish is Black
Spring:
For use with many single pickups (please note, there are a lot of variations in pickup springs, please check all notes in this specification for assistance. Contact us with additional questions.
Overall length uncompressed 13.5mm (17/32")
Overall length compressed 4.0mm (5/32")
Larger diameter (top) 7.25mm (9/32")
Smaller diameter (bottom) 5.25mm (13/64")
Application for use with many Import single pickup applications.
Package contains 6 screws and six springs
Please check overall length, there are many different lengths, diameters and types of screws fpr single pickups.| Single Type | Usage | In this set |
#4 x 3/4"
counter sunk
| Import and similar single pickups without tapped threads. These are thread cutting. Used in our staggered single and import pickups.
| Yes |
#4 x 3/4"
pan head | Import and similar single pickups without tapped threads. These are thread cutting. | NO |
4-40 x 3/4"
pan head
| Import and US made single pickups with small tapped threads. Used in our enclosed Single pickups | NO |
6-32 x 3/4"
counter sunk | US and specialty single pickups with tapped threads. Used in our Tele®
Style Bridge, Vintage style pickups and EMG Pickups | NO |
6-32 x 3/4"
pan head
| US and specialty pickups with tapped threads. Modern single pickups | NO |
| 4-20 x 3/4" pan head | US and Import Pickups, plastic thread cutting style. Use in Modern single pickups. Used on our Lipstick style pickups. | NO |
![]()
