Specifications: Chrome Finish Barrel Style sold in pairs Base is 5mm (13/64") diameter Total height including barrel is 8.6mm (11/32")
Barrel width is 11.2mm (7/16") Mount diameter is 5mm (3/16")
String Spread (center to center) is 7.0mm (slightly larger then 17/64")
Screw is 2.1mm (#2) x 14.7mm (37/64") Screw length beyond base of roller is 6.1mm (1/4")
Good replacement or new application barrel, designed for removing the slack from the strings and creating a correct pitch for the string behind the nut.
Please note, there are two different heights for this type of product. This is the higher unit. Many American and some MIM style setups require a low profile tree for this type of application. PLEASE NOTE: These are very fine screws, they will break if not mounted correctly.. The shank on this screw is 1.90mm (just over 1/16"). It is recommended you use a #50 or #49 drill bit and use screw wax to insert.
The trademarks, service marks or registered trademarks are those of their respective owners.
The parts on this site are made by or for Bitterroot Guitars.
These parts do not originate from the original OEM manufactures unless specifically identified as such.
Fender®, Strat®, Stratocaster®, Esquire®, Telecaster®, Tele®, Jazzmaster®, Jaguar®, Mustang®, P-Bass®, and J-Bass® are registered trademarks of Fender Musical Instruments Corporation.
Gibson®, Epiphone®, Les Paul®, S.G.®, Flying V®, ES-175®, ES-335® and P-90® are registered trademarks of Gibson Guitar Corporation
Kluson® is a registered trademark of W.D. Music Incorporated
LM®, SURELOCK® are registered trademarks of LM Products Company Incorporated
Lock-It® is a registered trademarks of Musical Distributors Group
Martin® is a registered trademark of Martin Guitar Company
S.I.T. Strings® is a registered trademark of S.I.T. Strings Company, Incorporated