Truss rod 14 1/8" for guitar necks

Two way adjustable

Rod is for inserting in neck while building.

Similar to many OEM style rods.

14 1/8" Long

New C Style Rod

Specifications:

14 1/8" Length (varies slightly due to construction 14" - 14 1/8") Rod length is tip to end of nut
Two Way Adjustment
4mm Allen key head
Body is wrapped in black shrink wrap to allow for gluing.

Works very well for heel mounted nut, also can be used for headstock setup or tilt back headstock

Requires:
1/4" wide slot
3/8" depth (approximate, actual is .369" allow for adjusting)
Cut for nut area is 1.50" long by .425" (about 7/16" total top to bottom)
Small step area 9/16 x 9/32" can generally simply be pushed into wood unless you are working in maple or similar hardness
Wrapped two way adjustable rod

14 1/8" overall length

We have drawings available for this application, please contact us for additional information.