Specifications:

Left Hand

Oxen Bone Nut

.236" thickness (6mm or 15/64")
.329" height (21/64" or 8.4mm) in middle
1st string height is .311" (5/16" (8.0mm)) at top edge of nut
6th string height is .324" (8.2mm (21/64"))
1.654" width (1 21/32" or 42.0mm)

String spread is 1.357" (Just over 1 11/32") Typical for width of nut

String slots are set for 12-50 gauge cut.

Radius 12"

Depending on your guitar, you may have to sand for height or adjust string slot cut for setup.

Note: This is a flat bottom nut similar to many modern G Style nuts, it is not tapered to fit older designs.

Molded Graphite Resin Material.

Please note: This product is an aftermarket product. It does not originate from the original manufacturer, this reference is only for purposes of identifying application for the part.