Nut, for Bass Guitars, 4 String

Composite material

Pre-Slotted string locations.

41mm or 1 39/64" (just under 1 5/8") x 0.185" deep

Black Finish

Specifications:

Overall width 1 39/64" (41mm or just under 1 5/8")
Composite nut.
Pre-slotted for standard 4 string setup
Overall height at string 1 - 0.33" (slightly over 21/64" or 8.4mm)
Overall height at string 4 - 0.327" (slightly under 21/.64" or 8.3mm)
Upper radius (string) is 9.5"
Overall Thickness is .185" (4.7mm or slightly less than 3/16")
Flat Bottom

Preslotted for .045-.105
String Spread is 1.224" (31mm or 1 7/32")

Black Finish



This product is a formed acetal copolymer glass reinforced plastic molded nut.
The plastic material is provides a pre-lubricated surface for smoother string action.

Please note: due to the variations in guitar setups, you may need to sand or adjust this part to fit your specific guitar. There are a number of radius and bottom setups, widths and other details that vary from guitar manufacturers, if you have questions, please email us, we will try to answer your questions as to fit, we cannot guarantee fit for specific guitars, there are so many variations from year to year and model to model.

You may need to adjust this product to fit your specific application.

This Product may contain a chemical known to the State of California to cause cancer and/or birth defects or other reproductive harm.
For more info go to www.P65Warnings.ca.gov