Guitar Nut Right Hand 44mm Epiphone® Style

Tusq

Replacement for Modern Epiphone® 44mm

.242" Thickness (6.1mm (slightly under 1/4")
.362" Height (just over 1/32" or 9.2m) in middle
1.732" length (1 47/64" or 44mm)

This is aTusq nut, the product is formed resin.
It is pre-shaped and pre-sized.

We are not associated with the original manufacturer; these parts originate from our suppliers only.
These are not made by the original OEM suppliers.

Specifications:

Right Hand

Tusq Nut

.242" Thickness (6.1mm (slightly under 1/4")
.362" Height (just over 1/32" or 9.2m) in middle
1.732" length (1 47/64" or 44mm)

String spread is 1 3/8" Typical for width of nut

String slots are set for 12-52 gauge cut.

Radius 15"

Depending on your guitar, you may have to sand for height or adjust string slot cut for setup.
Note: This is a flat bottom nut similar to many modern G Style nuts, it is not tapered to fit older designs.

Gibson®, Epiphone®, Les Paul®, S.G.®, Flying V®, ES-175®, ES-335® and P-90® are registered trademarks of Gibson Guitar Corporation. The reference is for the purposes of identifying a cross reference for this product, these products are made for us by our suppliers and do not originate from the OEM supplier or source.

This Product may contain a chemical known to the State of California to cause cancer and/or birth defects or other reproductive harm.
For more info go to www.P65Warnings.ca.gov